The Blaylock # BLTL-60-40D isn't available with keyed alike locks, but you can purchase just the assembly that installs into the lunette ring, part # BLTL-60 by itself and purchase keyed alike locks separately.
The Master Lock # ML312KA would be a good choice for a keyed alike lock. Simply choose the 'keyed alike' option from the drop down menu on the linked product page. view full answer...
The Buyer's products # 337BDB1394 Lunette Ring has a shipping weight of 19 lbs. You can see a product description video featuring the part by using the provided link. view full answer...
A pintle hitch is primarily used in heavy duty towing situations. The hitch itself resembles a hook that can be closed around the lunette ring that is mounted on the trailer. Part # C48210 is a good example of a pintle hook.
The pintle/lunette combination is typically used on construction or other heavy duty equipment. view full answer...
I will provide you with a link to the installation instructions, which include a full exploded drawing and listing of all parts.
You can find this link below. view full answer...
The shank portion of the B&W Tow & Stow Pintle Hook/Hitch Ball # BWTS10056 cannot be used as a component of a weight distribution system. B&W designed this adjustable pintle/ball combo hitch to offer the flexibility to tow as both a pintle hook/lunette ring and as a hitch ball, but not to serve as a basis for a weight distribution system. My contact at B&W confirmed.
We do offer a complete range of weight distribution/sway control hitch systems from Blue Ox and other manufacturers. The... view full answer...
I have another solution but the Brophy Swiveling D-Ring Anchors part # RR6K-4 do not have weep holes designed into them. I agree that they are a great idea and should have them. I have installed these in the past and drilled my own holes to ensure proper drainage I then touched up the holes with clear spray paint to help keep rust away.
The other option which does have weep holes to drain water and has the same capacity but you lose the Swiveling aspect is the etrailer D-Ring Tie Down... view full answer...
I can certainly understand just wanting to replace one part of your trailer hitch receiver lock, but those locks do not have replacement parts, so you are going to have to replace the entire lock. The correct one is going to depend on the size of your hitch.
- 1-1/4" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879
- 2" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches # e98880
- 2-1/2" Trailer Hitch... view full answer...
When using the 10" Nev-R-Adjust Electric Brake Assembly for 3.5 K Axles, Left Hand # 23-468 and Right Hand # 23-469, you will not need an actuator for the brakes to function on the trailer. An actuator is used to pressurize the hydraulic brake system so it is not needed for electric brakes. In order to function, the Nev-R-Adjust brakes will need to be wired to your trailer connector. The brakes will then receive it's signal from a brake controller like the Tekonsha Prodigy P3, # 90195,... view full answer...
Go To Results